Keenon Keenmow K1 with 5 Year Warranty
In stock
- BRAND:
- KEENON
- MODEL:
- KEENMOW K1
- ORIGIN:
- China
- Warranty:
- 60 MONTHS
- AVAILABILITY:
- ALLOW 2-4 WEEKS FOR DELIVERY
- SKU:
- Keenon-Keenmow-K1
Keenon Keenmow K1 with 5 Year Warranty
A clean lawn is often less about one dramatic cut than about repeatable, measured passes made in the right places, at the right height, without turning the garden into a wiring project. Keenon Keenmow K1 with 5 Year Warranty is presented for that problem: a KEENON robotic mower whose published specification centres on LiDAR, vision, multi-zone planning, and a wire-free deployment approach rather than buried boundary cable or RTK setup.
Robots USA supplies the Keenon Keenmow K1 with 5 Year Warranty to customers in the United States and supports buyers through quotation, project clarification, delivery coordination, and after-sales support. Robots USA can help confirm the current datasheet, warranty documentation, configuration requirements, and any site questions before the mower is quoted.
Background
KEENON and autonomous service robotics
KEENON is the brand named for this product, and the fact sheet identifies the model as KEENMOW K1. In practice, buyers looking at a robotic mower are not only choosing a garden machine; they are choosing a mobile robot that must localize itself, avoid obstacles, return for charging, and repeat work across changing outdoor conditions. That makes navigation, sensing, and maintenance planning central to the purchase discussion.
For residential and light property-care environments, a robotic mower is usually evaluated on whether it reduces routine manual mowing while preserving predictable grass height and safe movement through the lawn. Gardens can include narrow paths, roots, soft soil, slopes, patios, trees, furniture, and seasonal changes. The KEENMOW K1 is therefore best assessed as an outdoor autonomy platform as much as a cutting device.
Positioning of the KEENMOW K1
The published specification positions KEENMOW K1 as a wire-free mower with 3D LiDAR & AI Vision Fusion for position and navigation. It also reports obstacle avoidance using 3D LiDAR & 150° RGB Vision. Those two lines are important because buyers often compare robotic mowers by how the working area is defined and how the mower perceives objects while operating.
Per the published specification, the product is described as No Wires, No RTK, No Signal Loss. That wording indicates that buyers should not assume a buried perimeter-wire installation or an RTK reference station as the basis of the system, but the practical commissioning method, mapping workflow, and mobile-app procedure should still be confirmed against the current datasheet and quotation pack. The fact sheet does not publish blade type, rain sensor sensitivity, charging station dimensions, charging station weight, rated power input, or battery chemistry, so those details should be treated as quotation-stage checks rather than assumptions.
Technical Specifications
| Specification | KEENMOW K1 |
|---|---|
| Position & navigation system | 3D LiDAR & AI Vision Fusion |
| Obstacle avoidance | 3D LiDAR & 150° RGB Vision |
| Boundary wire / RTK | No Wires, No RTK, No Signal Loss |
| Max mowing size | 1500㎡ |
| Multi-zone management | 15 |
| Mowing motor power | 90W |
| Cutting efficiency | 120/200 ㎡/h |
| Blade disc | 5-Blade Disc |
| Cutting height | 20-70mm(0.79-2.76inches), electric adjustment |
| Cutting width | 22cm(8.66inches) |
| Maximum slope | 50%(27°) |
| Battery capacity | 5.0Ah |
| Working time per charge | 90min |
| Charging time | 100mins |
| Waterproof grade, mower | IPX6 |
| Waterproof grade, base station | IPX4 |
| Noise level | ≤60db |
| Connectivity | 4G,WiFi,Bluetooth |
| Product dimensions (L*W*H) | 643mm*440mm*283mm |
| Product weight | 15kg |
| Wheel and tire size | 23cm diameter, 5cm thick tires |
| Narrow pass | Up to 0.8m |
Specifications are as published for KEENMOW K1 and are confirmed against the datasheet at quotation.
How does KEENMOW K1 mow without boundary wire or RTK?
Many robotic mower comparisons begin with the perimeter: traditional installations may require boundary wire, while other systems depend on satellite correction technologies. Per the published specification, KEENMOW K1 is described as No Wires, No RTK, No Signal Loss, with position and navigation handled by 3D LiDAR & AI Vision Fusion. That combination is the core distinction buyers should examine when they want a mower that can be planned without physically defining the lawn edge by buried wire.
The practical benefit is a different installation discussion. Instead of asking where a cable can be trenched, the buyer asks how the site is mapped, how zones are defined, how edges and no-go areas are handled, and how the mower behaves around objects. The fact sheet reports 15 multi-zone management, which can matter where a garden includes a front lawn, back lawn, side strip, or separated landscaped areas. However, the exact user workflow, app screens, map editing functions, and site-survey procedure are not published in the fact sheet and should be confirmed by Robots USA during quotation.
What do the cutting and terrain specifications mean for lawn planning?
Per the published specification, KEENMOW K1 lists a maximum mowing size of 1500㎡, cutting efficiency of 120/200 ㎡/h, a 22cm(8.66inches) cutting width, and electric cutting-height adjustment from 20-70mm(0.79-2.76inches). These figures help frame whether the mower matches the lawn area, desired cut height, and mowing schedule. A buyer should compare the published mowing size with the actual maintained grass area, not the total property size, because driveways, beds, patios, and buildings do not require mowing but may affect routing.
Terrain is another practical part of the decision. The published specification reports a maximum slope of 50%(27°) and describes tires with 23cm diameter and 5cm thickness for grip on soft ground and roots. It also reports movement through narrow garden paths up to 0.8m. Those figures are useful for screening a site, but they do not replace a site-specific review of transitions, steps, drainage, hidden edges, and the condition of the grass surface.
Who is Keenon Keenmow K1 with 5 Year Warranty for?
This model is for buyers who want a robotic mowing solution for a maintained lawn where wire-free installation, sensor-based navigation, and multi-zone handling are priorities. The published maximum mowing size of 1500㎡ makes it most relevant to residential gardens and similar managed green areas that fall within that stated capacity. It may also interest property managers responsible for smaller landscaped areas where quiet, repeatable mowing is preferable to periodic manual cuts.
It is less suitable as an assumed answer for large estates, sports fields, municipal grounds, or commercial landscaping fleets unless the working area, charging strategy, supervision model, and maintenance plan are reviewed carefully. The fact sheet names KEENMOW K1 as the only version and does not provide a sibling trim with a larger area rating, larger battery, different cutting width, or commercial base station. If a buyer needs a bigger mowing envelope or a different operating profile, Robots USA should confirm whether another model is available rather than transferring KEENMOW K1 figures to a sibling product.
What is Keenon Keenmow K1 with 5 Year Warranty used for?
- Routine residential mowing: Maintaining grass height on lawns that fit the published KEENMOW K1 mowing specification.
- Multi-zone garden care: Planning work across separate lawn areas when the reported 15-zone management suits the property layout.
- Wire-free lawn automation: Reducing the need for boundary-wire installation where the published wire-free navigation approach is appropriate.
- Sloped garden sections: Screening lawns with inclines against the reported maximum slope of 50%(27°) before quotation.
- Narrow-path movement: Assessing gardens with constrained passages against the reported narrow pass capability up to 0.8m.
- Lower-noise mowing schedules: Considering mowing plans where the published noise level of ≤60db is relevant to neighbours or household routines.
Pricing and Availability
Robots USA provides pricing for Keenon Keenmow K1 with 5 Year Warranty by quotation, with the current configuration, warranty terms, accessories, site requirements, and support scope confirmed before order placement. Delivery, customs, and support are arranged with the quotation. To request the current offer and confirm suitability, Keenon Keenmow K1 with 5 Year Warranty is available on this page.
Frequently Asked Questions
Does KEENMOW K1 require boundary wire?
Per the published specification, KEENMOW K1 is described as No Wires, No RTK, No Signal Loss. The practical setup method and mapping workflow should be confirmed against the current datasheet at quotation.
What navigation system does KEENMOW K1 use?
The published specification reports 3D LiDAR & AI Vision Fusion for position and navigation. It also reports 3D LiDAR & 150° RGB Vision for obstacle avoidance.
How large a lawn can it mow?
Per the published specification, the maximum mowing size is 1500㎡. Buyers should compare this with the maintained grass area and confirm margins with Robots USA before purchase.
What cutting height and cutting width are published?
The published specification lists electric cutting-height adjustment from 20-70mm(0.79-2.76inches) and a cutting width of 22cm(8.66inches). Blade type is not published and is confirmed at quotation.
How long does it run and charge?
Per the published specification, working time per charge is 90min and charging time is 100mins. Battery chemistry is not published, so it should be confirmed in the quotation process.
What warranty information is available?
The product name on this page is Keenon Keenmow K1 with 5 Year Warranty. Coverage terms, exclusions, registration requirements, and service procedure should be confirmed by Robots USA in the quotation documents.
Where can I buy Keenon Keenmow K1 with 5 Year Warranty and what does it cost?
You can request a quote for Keenon Keenmow K1 with 5 Year Warranty from Robots USA. The cost is provided by quotation after the current configuration, warranty coverage, delivery, and support requirements are confirmed.
Summary
The appeal of KEENMOW K1 is the move from a lawn-care chore to a mapped, sensor-guided routine. The published specification brings together 3D LiDAR & AI Vision Fusion navigation, 3D LiDAR & 150° RGB Vision obstacle avoidance, a wire-free and no-RTK positioning statement, 1500㎡ maximum mowing size, 15-zone management, electric 20-70mm(0.79-2.76inches) cutting-height adjustment, and a 22cm(8.66inches) cutting width. Those details make it a focused candidate for buyers who want autonomous mowing without treating installation as a cabling project.
The responsible next step is to match those published figures to the actual lawn, paths, slopes, charging location, and support expectations. Robots USA can confirm the unpublished items, warranty terms, quotation details, and deployment questions so that the tidy, repeatable cut imagined at the start becomes a practical purchase decision. For that process, this page is the starting point.


