Agibot C5 Commercial Cleaning Robot

The Agibot C5 Commercial Cleaning Robot sweeps, scrubs and dust mops large commercial floors on its own, and its workstation handles the charging and water service routine that usually needs a person. It is built for busy retail, transit, office and hospitality spaces where floors must stay clean and staff time is better spent elsewhere.

In stock

BRAND:
AGIBOT
PART #:
C5
ORIGIN:
China
AVAILABILITY:
USUALLY SHIPS IN 7-14 BUSINESS DAYS
SKU:
AgiBot-C5
$28,999.00

Buy now, pay later

Free Shipping
Loading...

Agibot C5 Commercial Cleaning Robot

A floor scrubber is only as autonomous as the person who empties its tank. A machine can scrub a concourse unattended for hours, yet someone still has to dump the dirty water, rinse the tank, refill it and plug the machine in, and that routine quietly sets the real cost of robotic cleaning. The Agibot C5 Commercial Cleaning Robot is built around closing that loop. It sweeps, scrubs and dust mops in a single pass, then hands its tank chores to a workstation that charges the robot, disposes of wastewater, rinses the sewage tank and refills fresh water. Staff no longer have to run that service routine by hand.

Robots USA sells the Agibot C5 Commercial Cleaning Robot to facility owners, cleaning contractors and system integrators across the United States. Robots USA prepares each quotation, coordinates delivery to your site and stays your point of contact for support after the robot goes into service, so you have one team for every question from the first specification check to daily operation.

Background

AGIBOT and its move into commercial cleaning

AGIBOT is a robotics developer best known for its humanoid and service robots, a lineup that includes interactive humanoids, open-source research platforms and wheeled humanoid systems. The C5 applies the company's work in perception, positioning and fleet control to a more down-to-earth task: keeping large commercial floors clean. That background shows in the way the C5 is described. Its design centers on how the robot sees, locates itself and moves through a building, alongside the brushes and the water system.

Positioning: a scrubber that thinks about the whole building

Many cleaning robots are judged only by their brush deck. The C5 is positioned as a machine for complete buildings. It uses Laser-Vision Fusion Positioning Technology to hold its location, and Visual and Point Cloud Fusion Perception to recognize a wide range of obstacles. Access Control and Elevator Linkage lets it work with a building's doors and elevators, and Triple-Platform Control for Robot, Mobile and Cloud lets operators manage it at the machine, from a phone or remotely. On the cleaning side, AGIBOT describes the dual-chamber squeegee as an industry first, designed to leave no residual wastewater behind the robot.

Technical Specifications

SpecificationValue
Cleaning functionsSweeping, scrubbing and dust mopping
Water tank volume90 L
Scrubbing pressure25 kg
Ground pressureUp to 16 kPa
Water spray rate800 ml/min
Washing width550 mm
Debris removal efficiency95%
Scrubbing endurance3 h
Fan lifespan10000 h
Spray systemDual-Path Redundant Spray Design
SqueegeeDual-chamber squeegee design
Workstation functionsSelf-charging, wastewater disposal, sewage tank rinsing, fresh water refilling
Optional equipmentMobile water tank
PositioningLaser-Vision Fusion Positioning Technology
PerceptionVisual and Point Cloud Fusion Perception
Safety featuresBlind Spot Activation and Deactivation, Fall Detection, Collision Warning
Building integrationAccess Control and Elevator Linkage
Control platformsTriple-Platform Control for Robot, Mobile and Cloud

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the robot's dimensions, battery type, charging time, IP rating, climbing gradient, travel speed, clean water tank capacity, wireless connectivity or the brush consumables included; Robots USA confirms these at quotation.

How does the C5 workstation change daily cleaning operations?

Every scrubbing robot runs into the same service routine: the dirty tank fills, the clean water runs out and the battery drains. With a conventional machine, each of those events calls for a person. The C5 workstation takes over all four tasks. It charges the robot, disposes of wastewater, rinses the sewage tank and refills fresh water while the machine is in use. Your cleaning staff stop servicing the robot and start supervising it. They can check results, deal with spills that need a human hand and spend their time on work a machine cannot do.

The figures show why this matters. The C5 carries a 90 L water tank and is rated for 3 h of scrubbing endurance, and it sprays water at 800 ml/min. A robot with that throughput returns to the station regularly. When the station handles the turnaround on its own, those returns stop being interruptions and become a normal part of the cleaning cycle. Rinsing the sewage tank at the station also deals with one of the least pleasant parts of floor care: a tank of stale wastewater left standing in a utility room.

Can the C5 work in buildings where plumbing changes are difficult?

Yes. A docking station that drains and refills automatically usually needs a water supply and a drain nearby, and not every building can offer one. Leased retail units, heritage properties and busy terminals often make pipe work slow, costly or impossible to approve. For those sites the C5 can be fitted with an optional mobile water tank, which AGIBOT intends for scenarios where modifying the waterway piping is inconvenient. That lets you deploy the robot without first waiting on a plumbing contractor, and you can decide later whether a plumbed installation makes sense. When you request a quotation, Robots USA can help you weigh the two setups against your floor plan.

Under either setup, the cleaning hardware is the same. The 550 mm washing width, 25 kg of scrubbing pressure and up to 16 kPa of ground pressure are aimed at a deep clean, not a light wipe. The Dual-Path Redundant Spray Design keeps water reaching the floor along two paths, and the dual-chamber squeegee is designed to pick up wastewater so the floor is left without residue. With a fan lifespan of 10000 h and a published debris removal efficiency of 95%, the C5 is built for daily duty.

Who is the Agibot C5 Commercial Cleaning Robot for?

The C5 is designed for medium and large commercial interiors where hard floors are long, open and busy. Supermarkets and shopping malls can use it to scrub aisles and concourses before opening or during quieter hours. Airports and transit hubs, where public areas are rarely empty, benefit from its obstacle recognition and its Collision Warning and Fall Detection features. Office towers and hotels gain the most from Access Control and Elevator Linkage, because the robot can move between controlled areas and floors without someone escorting it.

Hospitals and care facilities often weigh the hygiene benefit of residue-free floors and automatic tank rinsing. Cleaning contractors who run several sites will value Triple-Platform Control, which lets a supervisor monitor robots from a mobile device or the cloud instead of walking every floor. Integrators and property technology teams will look at the building integration features first.

The sources name only one version, the C5, so there is no lighter or heavier trim to choose between. The other AGIBOT robots that Robots USA carries are humanoid and service platforms, not alternative floor cleaners. If your project needs autonomous floor care, the C5 is the AGIBOT model to evaluate.

What is the Agibot C5 Commercial Cleaning Robot used for?

  1. Retail floor care: Sweeping and scrubbing supermarket aisles and checkout zones in one autonomous run.
  2. Mall concourses: Keeping wide public walkways clean before and between peak shopping hours.
  3. Airport and transit terminals: Cleaning busy public areas while perception and collision warning help the robot work around people.
  4. Multi-floor office buildings: Moving between floors and secured zones through elevator and access control linkage.
  5. Hotel public areas: Maintaining lobbies and corridors with dust mopping and residue-free scrubbing.
  6. Healthcare corridors: Supporting routine floor hygiene with a workstation that rinses the sewage tank automatically.

Pricing and Availability

Robots USA supplies the Agibot C5 Commercial Cleaning Robot by quotation, so your offer reflects the configuration you actually need: a plumbed workstation or the optional mobile water tank, plus your site's floor area and integration requirements. Delivery, customs and support are arranged with the quotation. To begin, share your site details and the areas you want cleaned, and the request form for the Agibot C5 Commercial Cleaning Robot is available on this page.

Frequently Asked Questions

Which cleaning tasks does the C5 perform?

The C5 combines sweeping, scrubbing and dust mopping in one machine. You do not need separate equipment for each step.

What does the workstation do?

The workstation handles self-charging, wastewater disposal, sewage tank rinsing and fresh water refilling while the robot is in use. That removes the routine tank and battery chores from your staff.

Do I need to modify my building's plumbing?

Not necessarily. The C5 can be fitted with an optional mobile water tank for sites where modifying the waterway piping is inconvenient.

How does the robot navigate and avoid obstacles?

It uses Laser-Vision Fusion Positioning Technology to locate itself and Visual and Point Cloud Fusion Perception to recognize a wide range of obstacles. Blind Spot Activation and Deactivation, Fall Detection and Collision Warning add further safety layers.

Can the C5 use elevators and pass through secured doors?

Yes. The C5 supports Access Control and Elevator Linkage, so it can work across floors and controlled areas when it is connected to compatible building systems.

How do operators control the robot?

The C5 offers Triple-Platform Control: at the robot itself, through a mobile device and through the cloud.

Where can I buy the Agibot C5 Commercial Cleaning Robot and what does it cost?

You can buy it from Robots USA, which supplies the robot across the United States. Pricing depends on configuration and site requirements, so Robots USA provides it in a personal quotation that you can request on this page.

Summary

The real limit on a cleaning robot is rarely its brush deck; it is the service routine around it. The Agibot C5 Commercial Cleaning Robot tackles that routine directly. It combines sweeping, scrubbing and dust mopping, and its workstation charges the robot, drains it, rinses it and refills it, so the machine keeps working without someone tending its tanks. Fusion-based positioning and perception, elevator and access control linkage, and three ways to control the robot extend that independence across entire buildings, while the optional mobile water tank brings it to sites where plumbing work is difficult. If you want floor care that runs largely on its own, this page is the starting point.

Specifications

General

BRAND AGIBOT
PART # C5
ROBOT USE CLEANING
FCC APPROVED Yes

What's included

Agibot C5 Commercial Cleaning Robot (C5)

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

BROCHURES
Write a Review
You're reviewing: Agibot C5 Commercial Cleaning Robot
loader
Loading...

You submitted your review for moderation.