OrionStar CleaniBot K1
In stock
- BRAND:
- ORIONSTAR
- MODEL:
- CLEANIBOT K1
- ORIGIN:
- Canada
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- OrionStar-CleaniBot-K1
OrionStar CleaniBot K1
Most of the dust in a hotel or office never sits out in the open lobby. It settles under desks, along baseboards and in the narrow aisle between a conference table and the wall. Then it works its way down into carpet pile, where a quick pass with an upright vacuum never quite reaches. The OrionStar CleaniBot K1 is built around that problem. It is a compact vacuuming robot that goes where larger cleaning machines stop, pulling grit out of carpet fibers and dust off hard floors so your team can spend its hours on work that needs a person.
Robots USA sells the OrionStar CleaniBot K1 and supplies it to hospitality venues, office buildings and small commercial facilities across the United States. Robots USA prepares your quotation, coordinates delivery to your site and remains your point of contact for support once the robot is working your floors.
Background
OrionStar and its family of service robots
OrionStar builds service robots for commercial interiors. The CleaniBot K1 sits inside a broader lineup that covers floor care, item delivery and visitor reception. Within the cleaning robots range, the K1 is the dry-cleaning specialist: it handles vacuuming and dust mopping, and it does not support a water station. Wet scrubbing belongs to other CleaniBot models. That division of labor keeps each machine focused on the job it was designed for, and it keeps the K1 small enough to work in spaces a scrubber would never fit.
ZeroTangle: a brush designed against hair wrap
Anyone who has serviced a commercial vacuum knows the usual failure. Hair and fibers wind around the roller until it stops agitating the carpet and simply drags over it. The K1 tackles this with a V-shaped anti-tangle roller brush that actively prevents hair wrap. The brush is built on OrionStar's ZeroTangle technology, which combines a comb structure design with a labyrinth end design. The brush keeps its cleaning efficiency over long runs and protects carpet texture instead of wearing it down. Paired with 20kPa suction, it removes dust from deep within carpet fibers, not just from the surface.
Technical Specifications
| Specification | Value |
|---|---|
| Product type | Compact vacuuming robot for carpets and hard floors in tight spaces |
| Cleaning modes | Vacuuming, Dust Mopping |
| Suction power | 20kPa |
| Roller brush | V-shaped anti-tangle roller brush, ZeroTangle technology (comb structure design, labyrinth end design) |
| Body width | 42cm |
| Cleaning width (main brush) | 440 mm |
| Edge cleaning | 0cm |
| Max. cleaning efficiency | 700㎡/h |
| Dust bin capacity | 10 L |
| Net weight | 46 kg |
| Battery specification | 28.8 Vdc, 30 Ah |
| Battery life (operating time) | Vacuuming: 8h, Mopping: 4h |
| Charging time | 1.5 h |
| Auto recharge | Supported |
| Water station | Not Supported |
| Network connectivity | Wi-Fi / 4G |
| Noise level | < 75 dB(A) |
| Max. operating speed | 1.2 m/s |
| Max. obstacle climbing | 20 mm |
| Max. gradeability | 10° |
| Min. passing width | 880 mm |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
OrionStar has not published the payload, the IP rating, the navigation sensors, the overall dimensions, the contents of the box or details of a mobile app, so Robots USA confirms these with you at quotation.
How does the CleaniBot K1 handle tight spaces?
Compactness is the reason the K1 exists. The robot is built around a 42cm narrow body, which lets it pass through tight aisles and clean beneath desks and furniture. Those are the areas where dust collects precisely because nobody gets to them. Its 0cm edge cleaning carries the brush right up to walls and into corners, so the perimeter of a room gets the same treatment as the middle. The main brush covers a cleaning width of 440 mm on each pass.
The building itself matters too. OrionStar lists a minimum passing width of 880 mm, a useful figure to check against your narrowest corridors and doorways when planning the robot's territory. The K1 climbs obstacles of up to 20 mm, which covers the kind of thresholds and carpet transitions found in most offices and hotel corridors. It also handles slopes of up to 10°, so gentle ramps between floor areas are not a barrier. Where the layout opens up, it travels at up to 1.2 m/s and reaches a maximum cleaning efficiency of 700㎡/h. That combination lets one robot cover the open floor quickly and still slow down for the cramped corners.
How long can the CleaniBot K1 run between charges?
A cleaning robot earns its keep by staying on the floor. The K1 runs on a 28.8 Vdc, 30 Ah battery that delivers 8h of operating time in vacuuming mode and 4h in dust mopping mode. When the battery needs attention, auto recharge sends the robot back to charge without anyone walking it there, and a full charge takes 1.5 h. Plan the robot's day around those two figures and it can cover a long shift with very little hands-on time.
The 10 L high-capacity dust bucket supports the same goal. It holds enough debris for extended operation, which reduces how often staff have to stop and empty it. With a noise level of < 75 dB(A), the K1 suits environments where some activity is ongoing. Wi-Fi / 4G network connectivity keeps the robot connected in buildings where one or the other is the more reliable option.
Who is the OrionStar CleaniBot K1 for?
The K1 is aimed squarely at hospitality venues, office buildings and small commercial facilities. For hotel operators, it is a way to keep carpeted corridors, meeting rooms and lounge areas consistently clean without pulling housekeeping staff off guest rooms. Facility managers in office buildings will value the narrow body and edge cleaning in open-plan floors packed with desks, chairs and cable runs, the high-traffic office areas the robot was engineered for. Owners of smaller commercial spaces get dependable dry floor care in a machine sized for rooms that will never justify a ride-on unit.
The K1 is a vacuuming and dust mopping robot without a water station, so it is not the right choice for floors that need wet scrubbing. Buyers who need to scrub hard floors should look at the OrionStar CleaniBot M1 Commercial Scrubbing & Mopping Robot. For larger areas, the OrionStar CleaniBot S55 Pro Commercial Floor Scrubber Robot and the OrionStar CleaniBot C5 Commercial Cleaning / Scrubbing Robot cover scrubbing work. Many sites pair a dry robot like the K1 with a scrubber, and the wider commercial robots range shows what else can work alongside it.
What is the OrionStar CleaniBot K1 used for?
- Hotel corridors keeping long runs of carpet free of tracked-in dust and hair between guest check-ins.
- Open-plan offices vacuuming beneath desks and around furniture where manual cleaning is slow and often skipped.
- Meeting and conference rooms working along walls and into corners with edge cleaning that leaves the perimeter as clean as the center.
- Lobbies and reception areas dust mopping hard floors that see steady foot traffic through the day.
- Small commercial facilities delivering routine dry floor care in spaces too compact for larger cleaning machines.
- Mixed-floor buildings moving between carpet and hard floor across thresholds and gentle ramps on a single run.
Pricing and Availability
Robots USA prices the OrionStar CleaniBot K1 by quotation, so the offer reflects your site, the number of robots and the support you need. Delivery, customs and support are arranged with the quotation, so you have one clear picture before you commit. Tell us about your floors and your building, and request your quotation for the OrionStar CleaniBot K1, available on this page.
Frequently Asked Questions
Does the CleaniBot K1 work on carpet?
Yes. The K1 is engineered for carpets and hard floors, and its 20kPa suction removes dust deep within carpet fibers.
Can the K1 mop with water?
No. Its cleaning modes are vacuuming and dust mopping, and a water station is not supported. For wet scrubbing, look at the scrubbing models in the CleaniBot range.
How does the robot avoid hair tangling in the brush?
It uses a V-shaped anti-tangle roller brush with ZeroTangle technology, combining a comb structure design and a labyrinth end design to prevent hair wrap.
How long does the battery last?
Operating time is 8h in vacuuming mode and 4h in dust mopping mode, and charging takes 1.5 h. Auto recharge is supported.
How often does the dust bin need emptying?
The 10 L high-capacity dust bucket supports extended operation and reduces the need for frequent emptying. The actual interval depends on how much debris your floors collect.
Which navigation sensors does the K1 use?
OrionStar has not published the navigation sensors. Robots USA confirms them, along with any app details, when preparing your quotation.
Where can I buy the OrionStar CleaniBot K1 and what does it cost?
You can buy the OrionStar CleaniBot K1 from Robots USA. Pricing is provided by quotation for your specific project, so request your quote on this page.
Summary
The dust that makes a building look neglected rarely sits where a big machine can reach it. The OrionStar CleaniBot K1 goes after the overlooked places: a narrow body that slips beneath desks, edge cleaning that reaches corners, strong suction that pulls grit out of carpet, and a ZeroTangle brush that keeps working instead of clogging with hair. Long vacuuming runtime, auto recharge and a generous dust bucket keep the robot on the floor and your staff free for other work. For hotels, offices and small commercial facilities that want clean carpets in the hard-to-reach places, Robots USA can quote, deliver and support the K1, and this page is the starting point.