iTR iScrubbot 300 Commercial Floor Scrubber
In stock
- BRAND:
- ITR ROBOT
- MODEL:
- iScrubbot 300
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- ITR-ISCRUBBOT-300
Buy now, pay later
iTR iScrubbot 300 Commercial Floor Scrubber
Walk the length of a large public building and the floor changes under your feet: polished marble at the entrance, terrazzo across the concourse, sealed concrete behind the service doors, epoxy in the loading area, tile along the back corridors. Each surface has traditionally meant its own routine, and often its own machine and its own crew. The iTR iScrubbot 300 Commercial Floor Scrubber takes the opposite view. It is one large robot built for hard floors of every common kind, it sweeps and washes in the same pass, and it runs its cleaning program without anyone walking behind it. When a situation calls for human judgment, an operator can step on board and drive it directly.
Robots USA sells the iScrubbot 300 and supplies it to facilities across the United States. Our team prepares each quotation, coordinates delivery to your site and stays your point of contact for support once the robot is working your floors. If you are planning a fleet or replacing ride-on scrubbers, Robots USA can walk you through the configuration before you commit.
Background
iTR Robot Technology and the iScrubbot Series
The iScrubbot 300 is made by iTR Robot Technology Co., LTD., a robotics manufacturer based in Hangzhou, Zhejiang, China. The company builds cleaning robots for commercial and industrial sites, and the iScrubbot series is its line of autonomous floor scrubbers. Within that series, the iScrubbot 300 is the large cleaning robot, designed specifically for hard floor cleaning on big sites. Robots USA carries several other iTR machines as well, and you can compare them in our Cleaning Robots category.
Robotic scrubbers of this class exist because large floor areas generate a steady, repetitive workload. Cleaning the same hall to the same standard every day is exactly the kind of task that automation handles well, freeing people for spot cleaning, restroom care and the jobs that need hands and eyes.
Sweeping and Washing in a Single Pass
The defining design choice of the iScrubbot 300 is its integrated brush system. A site cleaning brush and a sweeping roll brush work together, so the robot sweeps and washes at the same time instead of needing a separate sweeping run first. iTR equips it with several functions in one platform: scrubbing, dirt absorption, sterilization, ash reduction and disinfection. Brush pressure is 30-60kg (66-132lb).
To move safely in occupied spaces, the robot uses a multi-sensor fusion design with multi-dimensional environment perception. iTR built it to respond flexibly to both static and moving obstacles and to keep strict safeguards between machine and people. Maintenance follows the same practical logic: the maintenance system needs no extra tools, and spare parts are easy to service.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions (L×W×H) | 1.42×1.05×1.5m (56×41×57in) |
| Weight | 350kg (771lb) |
| Cleaning width | 110cm (43in) |
| Max. productivity | 3600m2/h (38750ft²/h) |
| Max. speed | 1m/s |
| Max. working area | 17000m2 |
| Maximum mapping area | 40000m2 (430556ft²) |
| Battery capacity | 120Ah |
| Rated voltage | 48V |
| Charging time | 5h |
| Uptime | 4-7h |
| Clean water tank | 150L (32gal) |
| Recovered water tank | 140L (30gal) |
| Brush pressure | 30-60kg (66-132lb) |
| Gradeability | 12° |
| Functions | Scrubbing, dirt absorption, sterilization, ash reduction, disinfection |
| Driving modes | Standing driving design; automatic/manual mode switch |
| Applicable floors | Marble, granite, terrazzo, concrete, epoxy resin, tile, wood floor and other hard ground |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the IP rating, noise level, operating temperature, navigation system type, connectivity, brush motor power, suction power or the contents of the box; Robots USA confirms these details at quotation.
Can the iScrubbot 300 Run Without an Operator?
Yes, and that is the point of the machine. The iScrubbot 300 starts its tasks automatically, returns to charge on its own, and handles water addition and drainage without staff intervention. iTR designed it for 7x24h unattended operation, which means the routine work of keeping a large floor clean no longer has to be scheduled around the availability of a driver.
The figures support long, independent runs. A 120Ah battery at 48V gives an uptime of 4-7h, and a full charge takes 5h. The 150L (32gal) clean water tank and 140L (30gal) recovered water tank are sized for large areas, and the robot can map up to 40000m2 (430556ft²) of site. At a maximum speed of 1m/s, it reaches a maximum productivity of 3600m2/h (38750ft²/h).
Autonomy does not lock the operator out. The standing driving design lets a team member step on and take control whenever it makes sense, and the switch between automatic and manual mode is built for exactly that. A spill near a gate, a one-off event cleanup or a section that needs extra attention can be handled by hand, after which the robot returns to its program.
Which Floors Can the iScrubbot 300 Clean?
The iScrubbot 300 cleans marble, granite, terrazzo, concrete floor, epoxy resin, tile, wood floor and other hard ground. That breadth is what makes the robot suitable for buildings with mixed flooring, where a single route might cross three or four materials. The combined sweeping and washing action means loose debris and surface dirt are dealt with in the same pass, rather than requiring a dry sweep beforehand.
The robot handles slopes of up to 12°, which helps on ramps between levels, loading approaches and gently inclined walkways. Its 110cm (43in) cleaning width makes it most effective on open spaces such as halls, aisles and concourses. Buyers with narrow corridors or tightly packed layouts should weigh its 1.42×1.05×1.5m (56×41×57in) footprint and 350kg (771lb) weight against the paths it will need to travel.
Who Is the iScrubbot 300 For?
The iScrubbot 300 is aimed at operators who are responsible for large hard-floor areas and want to reduce the hours spent on repetitive scrubbing. Airports, train stations and transit hubs fit that profile, with long concourses and stone or terrazzo floors. Shopping malls, exhibition and convention centers have the same scale, plus the need to clean while the public is present.
Warehouses, logistics centers and manufacturing plants are a second strong segment: concrete and epoxy floors, wide aisles and a constant flow of dust and debris that benefits from sweeping and washing together. Hospitals, campuses and office complexes with large lobbies and public corridors are a third, especially where sterilization and disinfection are part of the daily cleaning routine.
Facility service contractors managing several large sites will also find value in a machine that can work unattended and still be driven manually. If your floors are smaller or your requirements differ, Robots USA can help you compare options across our Commercial Robots range.
What Is the iScrubbot 300 Used For?
- Transit concourses: keeping long stone and terrazzo walkways clean between and during peak periods.
- Retail and mall common areas: scrubbing wide hard-floor corridors on an automated schedule.
- Warehouse and logistics aisles: sweeping and washing concrete and epoxy floors in one pass.
- Manufacturing floors: controlling dust and surface dirt across large production halls.
- Healthcare and public buildings: adding sterilization and disinfection to routine floor care in lobbies and corridors.
- Exhibition and event venues: resetting large halls after events, with manual driving for spot work.
Pricing and Availability
Robots USA prices the iScrubbot 300 by quotation, so the offer reflects your site, your configuration and the support you need. Tell us about your floor area, surfaces and cleaning schedule, and we will prepare a quotation that fits the project. Delivery, customs and support are arranged together with the quotation. To start the process for the iTR iScrubbot 300 Commercial Floor Scrubber, use the quotation request available on this page.
Frequently Asked Questions
Does the iScrubbot 300 sweep as well as scrub?
Yes. It combines a site cleaning brush with a sweeping roll brush, so it sweeps and washes together in a single pass.
Can the robot handle its own water and charging?
Yes. It automatically starts tasks, charges, adds clean water and drains recovered water, and it is designed for 7x24h unattended operation.
How long does it run on one charge?
Uptime is 4-7h with a 120Ah, 48V battery, and charging takes 5h.
Can a person drive the iScrubbot 300 manually?
Yes. It has a standing driving design and switches between automatic and manual mode whenever the operator chooses.
What floor types is it suitable for?
Marble, granite, terrazzo, concrete floor, epoxy resin, tile, wood floor and other hard ground.
How large a site can the iScrubbot 300 map?
Its maximum mapping area is 40000m2 (430556ft²), and its maximum working area is 17000m2.
Where can I buy the iTR iScrubbot 300 Commercial Floor Scrubber and what does it cost?
You can buy it from Robots USA, which supplies it across the United States. Pricing is provided by quotation based on your site and configuration, so request a quote on this page.
Summary
Large buildings rarely have one kind of floor, and they rarely have enough staff hours to clean all of it by hand. The iTR iScrubbot 300 Commercial Floor Scrubber answers both problems with a single platform: one robot for marble, terrazzo, concrete, epoxy, tile and wood, sweeping and washing in the same pass, managing its own charging and water, and ready for an operator to step on board when the moment calls for it. Backed by Robots USA for quotation, delivery and support, it turns a patchwork of floor routines into one dependable program. For facilities ready to make that change, this page is the starting point.