Fairino Cobot (FR30)
In stock
- BRAND:
- FAIRINO
- PART #:
- FR30
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Fairino-FR30
Buy now, pay later
Fairino Cobot (FR30)
Thirty kilograms is the weight at which manual handling stops being a minor ergonomic note in a safety review and becomes a real staffing problem. It is also where many collaborative arms reach their limit, and where planners have traditionally turned to large, fenced industrial robots. The Fairino Cobot (FR30) is built to sit right on that line. It is a six-axis collaborative arm rated for a 30 kg payload, with a 35 kg maximum. It stands on a 240 mm footprint, reaches 1403 mm, and keeps the teach-and-run programming that makes cobots practical for teams without a dedicated robotics department. The question it answers is simple: how much heavy work can you automate before you need heavy infrastructure?
Robots USA supplies the Fairino Cobot (FR30) to manufacturers, warehouses, logistics operators and system integrators across the United States. Robots USA builds each quotation around the configuration your cell needs, either the standard IP54 arm or the optional IP65 version. Robots USA also coordinates delivery and supports the arm once it is running on your floor.
Background
FAIRINO and the FR series
FAIRINO builds the FR series of collaborative robots, a family of six-axis arms offered in several sizes. You can browse the full Fairino range here alongside the FR30. FAIRINO describes the FR30 as a new generation of collaborative robot, designed around human-robot collaboration technology. Its intended scenarios are palletizing, handling and high-torque work. That positioning matters. The FR30 is not a scaled-up desktop arm with a bigger number on the label. It is the member of the family aimed at the tasks where part weight, tooling weight and reach all add up at the same time.
Collaborative programming applied to heavy work
The FR30 keeps the working style that made collaborative robots popular. You program it through a 10.1-inch teach pendant or a mobile-terminal Web App, so a technician can build and adjust a routine without writing a full robot program from scratch. The arm can be mounted in any orientation: floor, wall, ceiling or an angled bracket. Integrators can therefore place it where the process needs it, rather than where a fixed pedestal happens to fit. The arm is built from aluminum and steel and weighs about 85 kg, a reasonable mass for an arm carrying this payload. Six rotating joints give full control of tool position and orientation, which heavy pick-and-place and palletizing patterns depend on.
Technical Specifications
| Specification | Value |
|---|---|
| Product type | 6-axis collaborative robot |
| Payload | 30 kg (max 35 kg) |
| Reach | 1403 mm |
| Repeatability (ISO 9283) | ±0.1 mm |
| Degrees of freedom | 6 rotating joints |
| Typical TCP speed | 2 m/s |
| Base joint: working range / max speed | ±175° / ±120°/s |
| Wrist 1: working range / max speed | +85° / −265° / ±180°/s |
| Tool I/O (end of arm) | 2 DI, 2 DO, 1 AI, 1 AO |
| Controller I/O | 16 DI, 16 DO, 2 AI, 2 AO |
| Tool power supply | 24 V / 1.5 A |
| Typical average power | 600 W |
| Typical peak power | 910 W |
| Robot weight | ≈ 85 kg |
| Footprint | 240 mm |
| Mounting | Any orientation |
| IP rating | IP54 (optional IP65) |
| Noise | < 70 dB |
| Operating temperature | 0 to 45 °C |
| Materials | Aluminum, steel |
| Programming | 10.1-inch teach pendant or mobile Web App |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
FAIRINO has not published the controller's rated supply voltage, the joint torque, the safety functions, the dimensions of the controller and the arm, or the supported fieldbus protocols; Robots USA confirms each of these with your quotation.
What does the IP65 option add over the standard IP54 arm?
The FR30 ships as standard with an IP54 rating, and FAIRINO offers IP65 as an option. In the IEC ingress protection system, the first digit covers solids and the second covers water. A higher first digit indicates tighter protection against dust, and a higher second digit indicates protection against stronger water exposure. In practice, the standard arm suits clean and moderately dusty environments such as warehouses, packaging halls and machine shops. The IP65 build is the one to discuss if the cell sees heavier dust, washdown or coolant spray near the arm.
Choose the rating to match the real conditions at the workstation, not the cleanest corner of the plant. The operating temperature of 0 to 45 °C applies when you plan an installation in an unheated dock or a warm production area.
What should integrators plan around the FR30's I/O and power?
Heavy-payload cells succeed or fail on tooling, and the FR30 brings useful resources to the end of the arm. The tool flange offers 2 digital inputs, 2 digital outputs, 1 analog input and 1 analog output, plus a 24 V / 1.5 A tool power supply. That is enough to drive and monitor a typical electric gripper or a vacuum head with feedback directly at the wrist. It keeps cable runs along the arm short and simple. Vacuum tools for palletizing cartons and mechanical grippers for machine tending both fit this pattern, as long as the tool works within that power budget.
At the cabinet, the controller provides 16 digital inputs, 16 digital outputs, 2 analog inputs and 2 analog outputs. These handle the conveyor sensors, pallet-present switches, stack lights and machine handshakes that surround a real cell. On the power side, the arm draws a typical average of 600 W and a typical peak of 910 W, which helps you size the electrical supply for the station. A noise level below 70 dB lets the arm work near operators without adding to the din of a busy line.
Who is the Fairino Cobot (FR30) for?
The FR30 suits end-of-line teams in food and beverage, consumer goods and building materials that still stack cases and bags by hand. These are exactly the loads where payload and reach matter more than finesse. It suits machine shops tending large CNC machines, where heavy blanks and finished parts have to be loaded at a distance from the operator's position. Warehouse and logistics operators can use it for depalletizing, order consolidation and heavy transfers between conveyors. System integrators get an arm with any-orientation mounting and a compact footprint that they can place into tight retrofit cells.
Not every project needs this much arm. If your parts and tooling are lighter, compare the other members of the family, such as the Fairino Cobot (FR20), the Fairino Cobot (FR16) and the Fairino FR10 Collaborative Robot (Cobot). You can also browse the full Cobots category. Robots USA can help you match the arm to the weight of your heaviest part plus its gripper.
What is the Fairino Cobot (FR30) used for?
- Palletizing: stacking cases, bags and trays at the end of the line in repeatable patterns, shift after shift.
- Large machine tending: loading heavy blanks into CNC machines and presses and removing finished parts.
- Heavy pick-and-place: moving weighty components between conveyors, fixtures and storage positions.
- Assembly: positioning large subassemblies precisely so that operators or downstream stations can join them.
- Inspection: presenting heavy parts to cameras or gauges in consistent orientations for quality checks.
- Packaging: filling, closing and transferring heavy cartons where manual lifting slows the line.
Pricing and Availability
Robots USA prices the Fairino Cobot (FR30) by quotation, so the offer reflects the exact build you need. That includes the IP54 or IP65 arm, the tooling plan and the scope of integration support. Tell us about the part, the gripper, the cycle you are aiming for and the environment, and we will match the offer to your cell. Delivery, customs and support are arranged with the quotation. To start, request your quotation for the Fairino Cobot (FR30) through the form available on this page.
Frequently Asked Questions
What payload can the Fairino Cobot (FR30) handle?
The FR30 is rated for a 30 kg payload, with a maximum of 35 kg. Remember to count the gripper or vacuum tool as part of that load.
How far does the FR30 reach, and how precise is it?
The reach is 1403 mm and the repeatability is ±0.1 mm under ISO 9283. That combination suits palletizing patterns and machine loading positions that sit some distance from the base.
Can the FR30 be mounted on a wall or ceiling?
Yes. The FR30 can be mounted in any orientation, so integrators can install it on the floor, a wall, the ceiling or an angled bracket.
How is the FR30 programmed?
You program it through a 10.1-inch teach pendant or a mobile-terminal Web App. Both routes support the collaborative teach-and-run workflow.
Is the FR30 suitable for dusty or wet environments?
The standard arm is rated IP54, and an IP65 version is available as an option for harsher conditions. The operating temperature range is 0 to 45 °C.
What I/O does the FR30 offer at the tool?
The tool flange provides 2 digital inputs, 2 digital outputs, 1 analog input and 1 analog output. It also supplies 24 V / 1.5 A to power the end-of-arm tool.
Where can I buy the Fairino Cobot (FR30) and what does it cost?
You can buy the FR30 from Robots USA, which supplies it across the United States. The cost depends on configuration and project scope, so request a quotation and Robots USA will prepare an offer that covers delivery and support.
Summary
The Fairino Cobot (FR30) works at the threshold where loads become too heavy for people to handle comfortably and too heavy for most collaborative arms. It brings a 30 kg rated payload, 1403 mm of reach and ±0.1 mm repeatability to that zone, on a 240 mm footprint that mounts in any orientation. It does this without giving up teach-pendant and Web App programming. Palletizing, large machine tending and heavy pick-and-place are where it earns its place, and the optional IP65 build extends it into harsher environments. If heavy handling is the bottleneck in your plant or warehouse, this page is the starting point.