KLEENBOT C55 with 5 Year Warranty

Clean floors in busy buildings create a practical conflict: the work must be thorough, but the route is rarely empty, the schedule rarely stops, and the operator cannot spend the day returning to the same high-traffic corridor. KLEENBOT C55 with 5 Year Warranty is positioned for that conflict as an autonomous commercial cleaning robot, with manufacturer-published information reporting a triple-roller cleaning design that integrates a sweeper and a scrubber into one platform. The same published specification reports a 550 mm scrubbing width, excluding the side brush, and a maximum theoretical cleaning efficiency of 2376 ㎡/h, making the C55 a candidate for facilities that need repeated, managed floor care rather than an occasional manual pass.

Robots USA sells KLEENBOT C55 with 5 Year Warranty and supplies it for commercial, institutional, and facility-management projects across the United States. Robots USA quotes the configuration, coordinates delivery, and supports the purchase process so that the final order can be checked against the current KEENON datasheet, the required brush version, and the site conditions before commitment.

Background

KEENON and commercial service robotics

KEENON is the brand behind the KLEENBOT C55. In commercial service robotics, cleaning machines sit at the demanding end of the category because they must move through real buildings, interact with people and obstacles, and perform a physical task that depends on water, brushes, recovery blades, and regular maintenance. For a buyer, the brand question is therefore not only about the robot body; it is about whether the machine can be matched to a cleaning routine, monitored, and supported in a professional environment.

Positioning of the C55 in floor cleaning work

Per the published specification, the C55 is offered in versions named C55 roller brush version and C55 disc brush. The fact sheet does not publish separate dimensions, runtime, efficiency, or sensor specifications for those versions, so the shared figures must not be treated as proof that every brush configuration behaves identically on every floor surface. The reported triple-roller design is the core positioning statement: KEENON presents the C55 as a machine that brings sweeping and scrubbing functions together, rather than as a scrubber that leaves separate pre-sweeping to another process.

Technical Specifications

Specifications are as published in the reviewed source material and are confirmed against the current datasheet at quotation.

How does the C55 combine sweeping and scrubbing?

The main published distinction is the reported triple-roller cleaning design. KEENON describes it as integrating a sweeper and a scrubber into one machine, which matters in facilities where dry debris and wet cleaning demands can appear in the same route. A buyer should still treat that claim as a configuration point to verify at quotation, especially when choosing between the C55 roller brush version and the C55 disc brush version.

The published accessory categories support the same cleaning logic. The source lists Sweeping Brush, Scrubbing Brush, Squeegee Blade, and Side Brush, showing that the cleaning path is not described as a single brush doing every job. However, the list is not an included-in-the-box statement. Robots USA should confirm consumables, spare parts, and delivered accessories with the final offer.

What should buyers know about battery swapping and the workstation?

Per the published specification, the C55 has a maximum runtime of 5 hours and supports battery swapping. The manufacturer-published information also reports dual-battery compartments that support hot-swapping while powered on, with replacement in 5 seconds. In practical purchasing terms, this is a planning feature: a facility can discuss how battery handling, operator checks, and cleaning routes should be organized without assuming that every site will run continuously in the same way.

The workstation is reported to connect to building pipelines, enabling automatic charging, clean water supply, and wastewater drainage. That is a significant infrastructure note because it moves part of the cleaning cycle from the robot alone to the building environment. Before purchase, the site should confirm whether the available utilities, drainage location, and intended parking area match the workstation requirements; the docking station model itself is not published in the reviewed source material and is confirmed at quotation.

Who is KLEENBOT C55 with 5 Year Warranty for?

KLEENBOT C55 with 5 Year Warranty is for facility teams, cleaning contractors, property managers, and institutional operators that need a managed approach to indoor floor cleaning. The published maximum theoretical cleaning efficiency, scrubbing width, reported LiDAR and stereo vision sensor set, and APP/webpage digital management make the C55 most relevant where cleaning work must be scheduled, monitored, and reported rather than handled as an informal manual task.

It may suit environments such as commercial buildings, public venues, transit-related facilities, underground parking garages, logistics areas, and institutional corridors, subject to a site review. The published obstacle-crossing note specifically reports stable crossing of speed bumps up to 5 cm high and mentions complex environments like underground parking garages. Where a buyer is choosing between the C55 roller brush version and the C55 disc brush version, the reviewed fact sheet does not publish separate performance figures or a surface recommendation that would justify steering one buyer segment to one version automatically. Robots USA should confirm brush choice, floor type, debris profile, and maintenance expectations during quotation.

What is KLEENBOT C55 with 5 Year Warranty used for?

1. Autonomous floor scrubbing: The C55 is used to run planned cleaning routes in facilities where automatic operation can reduce repetitive manual floor work.
2. Sweeping and scrubbing in one workflow: The reported triple-roller design is intended to combine sweeper and scrubber functions in a single cleaning platform.
3. Cleaning-route monitoring: APP/webpage 7*24 hours digital management is reported for task management, status notification, remote monitoring, and cleaning reports.
4. High-traffic commercial maintenance: Top-mounted multi-line LiDAR and four stereo vision sensors are reported for environmental scanning and navigation through crowded areas.
5. Parking-garage floor care: The published specification reports stable crossing of speed bumps up to 5 cm high, a useful point for garage-style environments.
6. Reduced manual servicing at a fixed station: The reported workstation can connect to building pipelines for charging, clean water supply, and wastewater drainage.

Pricing and Availability

Robots USA provides quotation-based pricing for KLEENBOT C55 with 5 Year Warranty because the final configuration, brush version, workstation planning, accessories, and support requirements should be confirmed before order. No price is published here, and buyers should request a formal quote so the current KEENON specification can be checked against the intended site.

Delivery, customs, and support are arranged with the quotation. To begin the purchase process, the KLEENBOT C55 with 5 Year Warranty quotation request is available on this page.

Frequently Asked Questions

What are the published dimensions and weight of the C55?

The manufacturer-published specification lists dimensions with squeegee as 850 × 860 × 1082 mm, stated as WxDxH. It also lists weight as 150 kg (331 lbs), with battery.

What cleaning width and efficiency are published?

The published specification lists a scrubbing width of 550 mm (21.7"), excluding the side brush. It reports maximum theoretical cleaning efficiency of 2376 ㎡/h (25,575.03 ft²/h), which should be confirmed against the current datasheet at quotation.

How long can the C55 run?

The reviewed source reports a maximum runtime of 5 hours and states that battery swapping is supported. It also reports dual-battery compartments with hot-swapping while powered on and replacement in 5 seconds.

What sensors does the C55 use?

Per the published specification, the C55 uses top-mounted multi-line LiDAR and four stereo vision sensors. The source describes this sensor set as supporting 360° real-time environmental scanning, autonomous path planning, and navigation through crowded areas.

Can the C55 be operated manually?

Yes, the published information says the machine can switch between manual and automatic modes. It also lists an assist handle.

Which important specifications are not published?

The manufacturer sources reviewed do not publish suction power, IP rating, the included accessories list in the box, Wi-Fi standard version, or docking station model. Those items should be confirmed by Robots USA at quotation.

Where can I buy KLEENBOT C55 with 5 Year Warranty and what does it cost?

You can buy it through Robots USA by requesting a formal quotation. Pricing is not published here because the final cost depends on the confirmed configuration, site requirements, and support scope.

Summary

The C55 is built around a familiar facility challenge: clean large, active floors without turning every route into a fully manual operation. The published specification reports a triple-roller design integrating sweeping and scrubbing, 550 mm scrubbing width, 5 hours maximum runtime, hot-swappable batteries, LiDAR and stereo vision sensing, and digital management through APP/webpage tools. It also reports a workstation concept that can connect to building pipelines for charging, water supply, and wastewater drainage.

The careful purchase decision is to verify the details that remain unpublished, especially suction power, IP rating, delivered accessory contents, Wi-Fi standard version, and docking station model. For buyers comparing brush versions or planning a workstation location, Robots USA can align the quotation with the current datasheet and the intended site. For KEENON-C55 evaluation and purchasing, this page is the starting point.