Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot with 5 Year Warranty

The awkward journey in many buildings is not the distance from reception to a room; it is the combination of privacy, timing, lift access, and repeated small deliveries that interrupts staff again and again. KEENON-W3 — Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot with 5 Year Warranty is specified as a way to move items indoors while keeping the delivery enclosed, traceable, and separated into compartments. Per the published specification, it is an autonomous delivery robot for hotels, offices, and healthcare facilities, with configurable compartment layouts and cross-floor capability for controlled-access environments.

Robots USA sells the KEENON-W3 Keenon BUTLERBOT W3 for organisations planning indoor service robot deployments in the United States. Robots USA quotes the configuration, confirms the current datasheet, arranges delivery, and supports the project discussion around fit, access control, elevator operation, and service expectations for the buyer’s site.

Background

KEENON and the service-robot context

KEENON is the brand named for this BUTLERBOT W3 product. In the broader service-robot category, buyers usually look for dependable indoor navigation, manageable interaction at the point of delivery, and a form factor that fits corridors, lift lobbies, service counters, and back-of-house spaces. Hotels, offices, and healthcare facilities all share a similar challenge: small items must reach many destinations, often when staff are busy with guest, employee, or patient-facing work.

The fact sheet for this model does not publish corporate history, market-share figures, deployment counts, or certifications. For that reason, this page focuses on the product data that is available and identifies the missing technical items that should be confirmed before purchase. That approach is especially important for facilities where hygiene procedures, building access, and IT approval can determine whether a robot is practical.

Positioning of the BUTLERBOT W3

Per the published specification, the BUTLERBOT W3 is positioned as a private and multi-floor service robot for indoor, controlled-access environments. Its enclosed, ventilated cabins are reported for hygienic, contactless service, and its use cases include transporting meals, amenities, or medical supplies. The published specification also reports that it can autonomously operate elevators, supporting multi-floor delivery rather than only single-level movement.

The compartment approach is central to that positioning. The source names 2 compartments, 3 compartments, and 4 compartments as configurable versions. This allows a buyer to consider whether larger individual compartments or more separated stops are the better fit, while keeping the common platform and navigation specification unchanged in the available data.

Technical Specifications

Specifications are as published from the available source and are confirmed by Robots USA against the current datasheet at quotation.

How does KEENON-W3 support private multi-floor delivery?

Per the published specification, the KEENON-W3 combines enclosed, ventilated cabins with cross-floor capability. That matters where the item being delivered should not be exposed in an open tray, such as a guest amenity, a meal, office material, or a healthcare supply. The enclosed format supports contactless handoff practices, while the compartment configuration helps separate multiple deliveries in a single trip.

The multi-floor element is also important. The published specification reports that the robot can autonomously operate elevators for multi-floor deliveries. Elevator integration normally requires site review, building coordination, and confirmation of access-control requirements, so Robots USA treats this as a project item to confirm during quotation rather than a generic plug-in assumption.

What do the compartment options change for operators?

The source names 2 compartments, 3 compartments, and 4 compartments. It also reports multi-point delivery of up to 4 locations per trip, total capacity of up to 90 L, and a load capacity of 20 kg (10 kg per layer). A buyer choosing between versions should therefore think about delivery pattern as much as total capacity: fewer compartments may suit larger items, while the 4-compartment version aligns with the published maximum of up to 4 locations per trip when separate destination storage is useful.

Because the published compartment size is 390 × 385 × 300 mm, teams should compare their typical packages, meal containers, amenity kits, or internal supplies against that stated space. Robots USA can help frame the quotation around those operational details, but the product data should be validated against the buyer’s actual items before a final configuration is selected.

Who is KEENON-W3 for?

KEENON-W3 is for facilities that have recurring indoor delivery tasks and want to reduce routine back-and-forth movement by staff. Per the published specification, the intended environments are hotels, offices, and healthcare facilities. In hotels, it may be considered for amenities and room-service style movements; in offices, for internal delivery between service points; and in healthcare facilities, for controlled movement of supplies where procedures permit.

The choice among 2 compartments, 3 compartments, and 4 compartments should follow the buyer’s delivery mix. A site moving bulkier individual items should review the 2-compartment layout first, while a site focused on separate stops should consider the 3-compartment or 4-compartment configuration. If the buyer’s corridors are tight, the published minimum passage width of ≥ 700 mm and the reported dimensions should be checked against the building before purchase.

What is KEENON-W3 used for?

1. Hotel amenity delivery: Send requested guest items through indoor routes while keeping items in enclosed cabins.
2. Room-service support: Move meals or packaged food items where the site’s service process and compartment size are suitable.
3. Office internal logistics: Carry small workplace items between reception, departments, meeting areas, or service desks.
4. Healthcare supply movement: Support controlled indoor movement of medical supplies where facility procedures allow robotic delivery.
5. Multi-stop service rounds: Use the reported up to 4 locations per trip to group small deliveries into one route.
6. Cross-floor delivery: Apply the reported elevator operation capability for buildings that require service across more than one level.

Pricing and Availability

Robots USA provides KEENON-W3 pricing by quotation because configuration, site requirements, elevator integration, and support expectations can affect the project scope. No price is listed here, and Robots USA confirms the 2-compartment, 3-compartment, or 4-compartment requirement with the buyer before quoting.

Delivery, customs, and support are arranged with the quotation. To request current pricing and configuration confirmation, the KEENON-W3 quotation request is available on this page.

Frequently Asked Questions

Is KEENON-W3 a hotel-only robot?

No. Per the published specification, it is designed for hotels, offices, and healthcare facilities, although the exact workflow should be reviewed for each site.

How many compartments does the BUTLERBOT W3 have?

The published specification names configurable 2, 3, or 4 compartment versions. The best choice depends on whether the site prioritises larger individual items or more separated stops.

Can it deliver to multiple floors?

Per the published specification, the robot has Cross-Floor Capability and can autonomously operate elevators for multi-floor deliveries. Robots USA confirms elevator and access-control requirements during quotation.

What is the stated load capacity?

The published specification reports 20 kg (10 kg per layer) and total capacity of up to 90 L. Buyers should compare their real delivery items with the stated compartment size before final selection.

What navigation system is listed?

The available specification lists 270° LiDAR, AI-Based SLAM, and Dual Stereo Vision Sensors. The obstacle detection range has not been published and is confirmed at quotation.

Are IP rating, noise level, and operating temperature published?

No. The manufacturer has not published the IP rating, noise level, operating temperature, Wi-Fi / network connectivity, box contents, or obstacle detection range in the provided data; these are confirmed at quotation.

Where can I buy KEENON-W3 and what does it cost?

You can buy KEENON-W3 through Robots USA. Pricing is provided by quotation after the configuration and site requirements are confirmed.

Summary

KEENON-W3 addresses the awkward part of indoor service delivery: private items, repeated trips, multi-floor routes, and the need to keep staff focused on higher-value work. The published specification reports a 48 kg autonomous delivery robot with 2, 3, or 4 compartment configurations, enclosed ventilated cabins, up to 12 hours of battery life, 0.8 m/s maximum speed, and navigation based on 270° LiDAR, AI-Based SLAM, and Dual Stereo Vision Sensors. Important unpublished details, including IP rating, network connectivity, noise level, box contents, obstacle detection range, and operating temperature, should be checked before procurement.

For a hotel, office, or healthcare facility comparing private service robots, the next step is not only choosing a model but confirming how the robot will move through the building, use elevators, and match actual delivery items. For that quotation and configuration discussion with Robots USA, this page is the starting point.